48
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
ATCR / ATCRL / GAICR / GAICR 300
Adjustments and operations
Tractor position related to the previous pass - lateral displacement
The lateral displacement is used to better position the tractor related to the furrow on
the previous pass, avoiding leaving a trace and giving a reference to the operator.
This positioning is obtained due to the tractor gauge and disk harrow cutting width.
Whenever possible, the tractor should pass over the unworked soil and next to the
last furrow.
The lateral displacement is done by changing the position of the drawbar on the hitch
bar, as shown below:
Normal position (centered): Used on most situations.
Position 1: Allows the tractor to get closer to the previous furrow.
Position 2: Allows the tractor to get farther from the previous furrow.
Cutting depth - depth stops (optional)
To control the depth with the
tires, use the depth stops (A) which
are placed on the cylinder rods (B) and
work as depth stops, allowing several
adjustments of the disc blades cutting
depth.
A
A
B
B
Position 2
Position 2
Position 1
Position 1
