TATA Motors TIAGO, Руководство пользователя, Страница: 87 / 153

EMERGENCY AND BREAKDOWN ASSISTANCE
86
Wheel covers (if equipped)
Insert a piece of cloth between the
spokes of the wheel cover and pull it out-
wards. Take out detached wheel cover
from the wheel rim.
When installing the cover, make sure
that it is positioned so that it does not
cover the air filling valve. Apply equal
pressure at the circumference of the
wheel cover to fix it in the wheel rim.
NOTE
Do not use any sharp tools (such
as screw driver etc.) to remove the
wheel cover.
Changing flat tyre
Loosen the nuts (as indicated) on the
wheel in diagonal sequence. Do not un-
screw the nuts completely before jacking
the vehicle.
Wheel nut removal
Assemble the Jack handle and wheel
spanner (as shown in jacking fig.)
Position the jack vertically and raise it by
turning the jack handle clockwise until
the jack sits completely on jacking point
and the base of the jack lies evenly on
the ground.
The jacking points are indicated on the
vehicle (Refer jacking point location).
Jacking point location