TATA Motors NEXON, Руководство пользователя

Страница: 32 / 232

SAFETY
21
Electronic brake force distribution
(EBD)
EBD monitors and controls
the brake pressure on the
rear wheels to improve driv-
ing stability while braking.
EBD provides optimal braking pressure
distribution between front and rear
wheels to optimize braking distance and
to ensure vehicle stability by means of
lowering braking pressure at rear
wheels
.
WARNING

If EBD is malfunctioning, the rear
wheels can lock, e.g. under full
braking. This increases the risk of
skidding and an accident.

You should therefore adapt your
driving style to the different han-
dling characteristics. Have the
brake system checked immedi-
ately at a TATA MOTORS Author-
ized Service Centre as soon as
possible.
Electronic Stability Program (ESP) (if
equipped)
ESP monitors driving stabil-
ity and traction.
If ESP detects that the vehicle is deviat-
ing from the direction desired by the
driver, one or more wheels are braked to
stabilize the vehicle. The engine output
is also modified to keep the vehicle on
the desired course within physical limits.
ESP assists the driver when pulling away
on wet or slippery roads. ESP can also
stabilize the vehicle during braking and
acceleration.
Additional safety features (as avail-
able)
Cornering Stability Control (CSC)
Corner stability Control supports / stabi-
lizes vehicle during partial braking on
curves by reducing pressure at required
inner wheel of the vehicle.
This helps to reduce probability of vehi-
cle over steering during cornering.
OFF Road ABS
Based on wheel speed information off
road ABS helps to avoid wheel lock on
uneven surfaces like loose gravel, pot-
holes by reducing the stopping distance
compared to standard ABS.
Electronic Traction Control (ETC)
The Electronic Traction Control system
function (ETC) is designed as a slip con-
trol system to prevent the driven wheels
of a vehicle from excessive wheel slip.
Roll over Mitigation (ROM)
The main feature of the Roll over Mitiga-
tion function is the detection of a rollover
critical situation and to prevent the vehi-
cle rollover. This is done by active brake
interventions on selected wheels,
thereby reducing the forces that cause a
rollover situation.
Brake Disc Wiping (BDW)
Water on the brake disc leads to a delay
in brake response time. The purpose of
the function Brake Disc wiping is to re-