NUT
TOILET BOLT
BOLT CAP
FLANGE
PLACING TOILET ON FLANGE
a) Clear the floor waste opening and place the toilet on the flange
so that the bolts pass through the mounting holes.
b) Loosely install the retainer washers and nuts. The washer sides
marked “THIS SIDE UP” must face up.
- 3 -
TOILET INSTALLATION
a) Position the toilet square to the wall and, with a rocking motion,
press the bowl down on the wax ring and flange. Alternately
tighten the bolts until toilet is firmly mounted to the ground.
WARNING:
Do not overtighten nuts, as this could
damage the base.
NUT
METAL
WASHER
TAPERED
WASHER
TOILET
BOLT
5
6
FLANGE
b) Install the bolt caps on the washers. If necessary, cut the bolt
height to the correct length before installing bolt caps.
c) Join the water intake valve and the supply valve with the flexible
connecting hose (if the part consists of a separate filter, connect
the filter first). Turn on the water supply and make sure that all
of the connections have been properly joined and that there are
no leaks.
NOTE: Tightening the nuts further can prevent leakage.
TOILET SEAT INSTALLATION
Install the toilet seat in accordance with the manufacturer’s instructions.
7
