4
3
4
Connect Bed Heads To Base
Fit Double Ended Screws To Unused Holes
• Connect the base to the left bed head. Ensure the sides of the beds heads with
the metal glide pins inserted are facing the correct way for this stage of assembly.
Screw the two sections together using 2 bolts, but do not fully tighten.
• Now connect the right bed head to the base. Screw the sections together using 2
bolts, but do not fully tighten.
When building the Cot, use locating holes “Cot”
When building the Bassinet, use locating holes “Bassinet”
Use the double ended screws to fill the four unused locating holes - one in each corner of the
cot. This is required to prevent the entry of small fingers into these holes.
THIS SIDE UP
THIS SIDE UP
Co
t
Ba
ssi
ne
t
Cot
Bas
sin
et
Cot
Bas
sin
et
Co
t
Ba
ssi
ne
t
Sides with glide pins must face
downwards for this stage of
assembly
