TasmanEco Sleigh Скачать руководство пользователя страница 5

Страница: 5 / 8

Connect The Rear (Fixed) Panel

Connect The Front Adjustable Panel

Connect the rear (fixed) panel to the bed heads using 2 bolts on either side.
Screw the sections together but do not fully tighten at this time.

Insert the front (adjustable) panel between the left and right bed heads.
NOTE: It is best to have assistance at this stage to avoid damaging the side frames when inserting the glide

pins into the guide channels. The bed head frames will need to be spread apart slightly so the glide pins do

not damage the timber. If required, untighten the connector bolts holding the frames together.

Push the upper glide pins into the top of the guide channels on the bed head frames, then slide the front

panel down slightly on either side. Once the top glide pins are in place, slide the bottom glide pins into the

bottom guide channels.

With these sections now assembled, carefully

lift up and stand the cot on its legs.

Front (Adjustable) Panel

Make sure the badge is

facing the front of the

panel

THIS SIDE UP

Содержание Sleigh









Результаты поиска

Содержание Sleigh

Отзывы:

Бренды по названию

Популярные бренды

TasmanEco Sleigh, Руководство по сборке и инструкция

Результаты поиска

Содержание Sleigh

Отзывы:

Бренды по названию

Популярные бренды