TRAMPOLINE MAT ASSEMBLY
17
Step 7
– Spring Assembly
After you have secured the spring at point “ONE”, count to hole 29 on the opposite side of the Mat and
attach a spring in the same manner as the previous step. For even distribution of spring tension and ease
of assembly, the springs must always be installed on opposite sides of the mat in an alternating manner,
i.e. 1, then 25, followed by 13 and 37 as shown below.
Hint:
The number of triangle-rings sewn onto the Mat is equal to the number of holes on the frame. If you
notice that you have miscounted a hole or triangle-ring, remove and reinstall the springs as necessary while
maintaining an even distribution of tension as explained above.
