ASSEMBLY AND INSTALLATION INSTRUCTIONS
10
Assembly and Installation Instructions
During periods of non-use, this trampoline and trampoline enclosure can be easily
disassembled and stored by reversing the order of installation.
At least two people are required to assemble the trampoline and trampoline enclosure.
Protective gloves
must
be used during assembly to avoid injuries during installation.
Protective goggles
must
be worn to avoid injuries to the eyes.
For appropriate use of the trampoline, please assemble the trampoline in a location that meets the
following conditions:
Adequate overhead clearance is needed. A minimum of
26.25ft (8 metres) from ground level is
recommended. Provide clearance for wires, tree limbs and other possible hazards.
Lateral clearance is essential. Place the trampoline away from walls, structures, fences and other
play areas. Maintain a clear space on all sides of the trampoline.
Place the trampoline on a flat and level surface before use.
Do not install this trampoline on hard surfaces. Suitable surfaces include grass or sand.
Use the trampoline in a well-lit area. Artificial illumination may be required for shady areas.
The trampoline should be installed in an area where access can be restricted from unauthorized
and unsupervised use.
Ensure there is nothing beneath the trampoline that could cause injury or obstruct movement of jump mat.
Remove any obstructions from beneath the trampoline.
The trampoline enclosure is only to be used as an enclosure for a trampoline of a size for which
the enclosure is designed.
The owner and supervisors of the trampoline are responsible to make all users aware of practices
specified in the use instructions section.
Users may become entangled in or strangled by loose cords or in gaps between trampoline and
enclosure. Keep enclosure tightly fastened to the trampoline in accordance with the
manufacturer
’s instructions. Failure to properly assemble and maintain a tight, secure
trampoline/enclosure boundary may result in serious injury, strangulation, or death.
If you do not follow these guidelines, you increase the risk of injury or death.
PRIOR TO ASSEMBLING
Before assembly, please ensure that you have all the parts required to assemble the product. If you
are missing any parts, please contact our Customer Support agents.
Please do not use unauthorized parts to assemble the trampoline. This may damage the integrity of the
product and will void the manufacturer’s warranty.
DO NOT use electric power tools to tighten or loosen bolts and screws as this can damage the hardware.
Review all steps before assembly and read all precautions before using this
product. Failure to do so can result in serious injury or death.
