ARM 20-pin 2.54mm Galvanic Isolation Adapter
Galvanic isolation is used where two electric circuits must communicate, but their grounds
may be at different potentials. It is an effective method of breaking ground loops between the
two circuits. Galvanic isolation is also used for safety, preventing accidental current from
reaching ground through a person's body.
iSYSTEM Galvanic Isolation Adapters provide a
basic
isolation that withstands high voltages.
To prevent injury to personnel when dealing with potentially hazardous voltages it is
mandatory to have a second protection measure in place, in case the first insulation barrier
fails. This is termed double or, reinforced isolation. How should a double isolation be
implemented depends on the use-case or application setup.
It is your responsibility to check the local safety directives applicable to your company
and country to ensure that all requirements are met.
ARM 20-pin 2.54 mm Galvanic Isolation Adapter is used to electrically isolate:
·
iSYSTEM iC5700 BlueBox in conjunction with
o
20-pin 2.54 mm ARM Debug Adapter
o
ARM HSSTP II Active Probe (Ordering code IC57125-1) + 40-pin Samtec ERF8 to 20-pin
2.54 mm ARM Converter (Ordering code IASAM40ARMPIN20)
from the embedded target.
Find more information on
. To reach
for technical support, please visit
