11
I1
8
I1
7
I1
6
tr
sv
slp
l
n
o
it
h
u
fr
fie
s
en
d
e
cz
Translation of the original EU Declaration of Conformity
We hereby declare that the product described below both in this basic design
and con-struction and in the version marketed by us conforms to the relevant
health and safety related requirements of the appropriate EU Directive.
This declaration shall cease to be valid if modifications are made to the product
without our approval.
Applicable EU Directives:
Directive 2006/42/EC
of the European parliament and of the council of
17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
Directive 2004/108/EC
of the European parliament and of the council of
15 December 2004 on the approximation of the laws of the Member States
relating to electromagnetic compatibility and repealing Directive 89/336/EEC
Harmonised standarts applied:
EN 60 335-1 / EN 60 335-2-69 / EN 62 233
EN 55 014-1 / EN 55 014-2
EN 61 000-3-2 / EN 61 000-3-3
It is ensured through internal measures that series-production units conform at
all times to the requirements of current EU Directives and relevant standards.
The signatories act on behalf of company management and with full power of
attorney.
Overview
1
Fastener catch
2
Socket (max.150W) Only recommended accessories might be used with
this socket!
3
Cable rewind
4
Transport handle
5
Vacuum lid
6
ON/OFF switch
7
Cord support
8
Power supply socket for power supply cord
9
Parking position for the suction tube and squeegee
10
Accessories holder (only vento 15)
11
Canister
12
Unlocking device for suction hose
13
Hose connector
14
Universal dust squeegee
15
Dusting brush nozzle (standard accessory: only vento 15)
16
Crevice nozzle (standard accessory: only vento 15)
17
Suction tube
18
Hose tube
19
Suction hose
Preparation for operation/Operation
Beginning work
End of operation
Designation:
Dry vacuum cleaner for commercial use
Product:
Vacuum Cleaner
Name:
vento 8/15
Model:
vento 8
(220-240VAC/50-60Hz, 900W)
vento 15
(220-240VAC/50-60Hz, 1150W)
Serial number:
see rating label at the machine
Trademark:
Producer:
Techtronic Product Development Ltd.,
24/F CDW Building, 388 Castle Peak Road,
Tsuen Wan, Hong Kong
Person authorised to compile the technical file:
Angelo Sabatino
Diversey Europe B.V. Utrecht
Zweigniederlassung Münchwilen
CH-9542 Münchwilen
Hong Kong, 11.01.2012
• This marking indicates that this product should not be
disposed with other houshold wastes throughout the EU.
To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return
and collection systems or contact the retailer where the
product was purchased. They can take this product for
environmental safe recycling.
Zhang Guo Feng
Manager
• See the leaflet included in the packaging.
• Insert the dust bag as described in the pictogram on the dust bag.
• Insert the basket, the arrow at the top must point towards the hose
connector.
• Place the ridge of the vacuum lid (2) into the
guide provided on the canister (1), then press
down until you hear the fastener catch click into
place.
• Assemble the suction accessories.
• Insert the suction hose into the hose connector until it locks in.
• Plug the power supply cord into the mains socket.
• Switch the machine on (ON/OFF).
A bleed hole cover with which the suction force can be regulated is mounted
on the tube bend.
The supplied accessory (for vento 15 only) can be attached to the tube or the
hose tube.
• Switch the machine off (ON/OFF) and pull the power supply cord out of the
mains socket.
• Wipe down the machine with a damp cloth.
• Wind up the power supply cord from the vacuum lid starting at the cable
rewind.
Caution:
Never clean the machine with high water pressure or a water
hose.
The ingress of water into the machine might cause considerable
damage to mechanical or electrical parts.
1
2
3
5
6
7
8
9
10
11
12 13
14
15
16
17
18
19
4
1
2
To Order Parts Call 1-888-702-5326 - https://monsterfloorequipmentparts.com