9
I25
I24
I23
I22
I21
I20
I19
I18
I17
I16
I15
I14
I13
I12
I11
I10
I9
I8
I7
tr
pt
it
fr
en
de
Instructions of use
Symbols
Intended use of machinery
The scrubber dryer is used to clean hard floor surfaces according to these
instructions of use.
The machine is suitable for floor cleaning applications in industrial and
commercial areas such as hotels, schools, hospitals, factories, shopping
centres and offices.
Content
Safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EU Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preparation for operation/Operation . . . . . . . . . . . . . . . . . . . . . . . . . .
Beginning work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Service, maintenance and care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Squeegee settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dimensions of the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety instructions
Due to their design and construction, TASKI machines comply with health and
safety requirements of the EC guidelines and therefore carry the CE sign.
ATTENTION!
Before first start-up, it is essential that you
read the instructions of use and the safety
notes carefully.
Keep the instructions of use in an easily
accessible place so that they can be consulted
at any time.
Non-observance of this information can endanger people and / or
cause servere damage!
Non-observance of this information can lead to malfunctions and
property damage!
Important information about correct use. Non-observance of this
information can lead to malfunctions!
Action points.
This machine may only be used by persons who have been
properly trained to do so!
Do not use the machine in rooms where explosive and flammable
substances (e.g. petrol, thinners, heating oil, solvents, etc.) are
stored or processed. The electrical or mechanical components of
the machine could lead to ignition of these materials.
Do not use this machine to vacuum toxic, poisonous, caustic or
irritating substances (e.g. acids, alkalis, hazardous dusts, etc.).
The filter system will not adequately retain these kinds of
materials. A possible impairment of the health of the user and of
third parties cannot be excluded.
While operating the machine, take note of the surrounding area
and pay particular attention to third parties and children!
Neither persons or objects may be transported with the machine!
In case of damage to parts that could affect safety, such as the
tool cover, power supply cord or covers that prevent access to
current-carrying parts, the operation of the machine must be
stopped immediately!
STOP
STOP
•
STOP
STOP
STOP
STOP
STOP
STOP
STOP
STOP
STOP
STOP
STOP
STOP
Regularly check the power supply cord for tearing or aging, and
do not put the machine into operation if it is not in a safe and
suitable condition!
Caution:
Repairs to mechanical or electrical parts of the machine must only
be undertaken by JohnsonDiversey authorised customer service
workshops or experts who are experienced in all relevant safety
regulations.
Minimum requirement for the power supply cord H07RN-F3x1.5
or CSA type SJTW 14AWG power cord.
Caution:
This machine is only intended for use in dry areas, and must not
be used or stored in the open air or under damp conditions.
Caution:
Pay attention to the accident prevention regulations!
Caution:
Switch off the suction unit immediately if foam or liquid escape
from the machine!
See page 14 for further procedure .
Caution:
Only use tools which are specified in the instructions of use under
accessories and which the TASKI-technical specialist
recommends (Page 15), as the use of other tools could impair
safety.
Caution:
Personal safety is covered by appropriate national regulations!
Caution:
It is forbidden to plug in or unplug the main power supply cord with
wet hands!
Caution:
Attention, make sure that the power supply cord does not touch
the rotating brushes!
Caution:
Take care not to damage the power supply cord by driving over it.
Avoid crimping, tearing or damaging the power supply cord
through heat, oil, or sharp objects!
Caution:
Please make sure that the voltage stated on the machine label is
the same as the voltage rating of the plug socket!
Only use the machine on level floors or on gradients of 2% or less.
This symbol on the machine indicates that it is not suitable for use
on surfaces with greater gradients.
STOP
STOP
2%
