Taski Swingo 450B Скачать руководство пользователя страница 5

Страница: 5 / 63

Technical Manual

31. May 2007

Revision: V1.10

1-2

02.0 swingo

- forew

ord.fm - 31. May 2007

Foreword

1.1

Target

To serve our customers faster and more efficient it is important to achieve a general

standard of technical knowhow with our partners in the market.

Therefore we developed a new Technical Training concept which is based on e-spares.

The concept consists of a Technical Training, a Technical Manual and Training DVD.

These three tools will be produced for each newly launched machine with a certain

complexity. The Technical Manual will be available as PDF. The Technical Training

documentation will be distributed after having attended a technical training, and the

Technical Manual can be downloaded from e-spares. The DVD can be orderd at your

GTS contact.

1.2

Technical Training

The Technical Training is addressed as reference book for the technical training ses-

sions and will be distributed to the floor care responsible and/or to the technical train-

ing responsible after attending a training session provided by GTS (Max. 2 persons

per country).

The intension is, that a technical trainer after this session, is able to perform technical

training for their local technical staff and in this way to transfer the knowledge to all

service technicans.

The Technical Training is not intended as manual for the service technicians and will

be distributed only to the training responsible of each country.

1.3

Technical Manual

The Technical Manual is addressed to the service technicians and should be translated

and distributed after a technical training.

It contains a summary of procedures, hints and suggestions etc. which are helpful and

essential for the daily business. The Technical Manual can be downloaded from e-

spares/documents and bases on the matters of the Technical Training.

Содержание Swingo 450B




















































Результаты поиска

Содержание Swingo 450B

Отзывы:

Taski Swingo 450B, Техническое руководство, Страница: 5 / 63

Результаты поиска

Содержание Swingo 450B

Отзывы: