24
Preparing to drive
Attaching tools
Check:
• that the brush has not fallen below the red mark or a brush length of 1 cm.
• the pad for wear before using.
Foot pedal
Attach squeegee
Filling water
Dosage:
Only use chemical products recommended by the manufacturer.
The dosing aid is designed for a 0.5% and 1% cleaning solution.
Dosing examples:
• Switch on the keyswitch.
The indicators light up briefly.
The battery indicator displays that the machine is
ready for operation
(on malfunction see page 27).
• Hold the handle and adjust the height of the
drive switch so that it can be operated
comfortably.
The drive switches can be moved up and down
by lightly pressing on them.
By lightly pressing the speed control in the
direction of drive, the machine is set in motion.
Letting the speed control go stops the machine.
• Switch the machine off using the keyswitch and remove the key.
Working with worn out, damaged and or wrong tools, could result
in possible damage to floors or their protective layers.
• Position the tool below the brush unit.
• Switch on the keyswitch.
The indicators light up briefly.
• Unlatch the foot pedal and slowly lower the tool.
While being lowered, the coupling begins to
slowly rotate. This centres and locks the tool
into place.
• Switch the machine off.
• Lay the squeegee under the squeegee holder.
• Position the squeegee so that the squeegee
holder is under the towing strap.
• Press the foot pedal down until the squeegee
locks into place.
• Plug the suction hoses into the squeegee
support.
Start
Start
Caution:
Maximum permissible water temperature 60 °C/140 °F.
• Switch the machine off using the keyswitch and remove the key.
• Reach into the opening between the tank lid and
the tank.
Palm facing upwards.
• Open the lid until the self support locates on the tank wall.
• Remove the dosing aid.
• Fill water into the solution tank.
Maximum permissible filling level (page 22).
Caution:
Wear protective gloves, goggles and the corresponding
(protective) work clothing when handling chemical products!
Caution:
The use of other chemical products (e.g. with acidic or chlorine
constituents) can damage or destroy the machine.
• Dosing aid application
• Add the product measured with the dosing cup to the water in the solution
tank.
• Lift the tank lid slightly.
• Gently press the tank lid support inwards.
• Close the tank lid.
• By exerting slight pressure onto the front of the lid, you can click it into the
latch.
max.60
˚
C
max.140
˚
F
