29
User Guide
Touchshield Diagnostic
This diagnostic shows if the machine is contacting an object. The touchshield is the plastic skirt
that wraps around the lower perimeter of the machine, about 6” off the floor. Behind the plastic
are contact sensors that will notify the computer if the machine is applying more than 24 oz. of
force against an object.
Each of the 6 zones “
A
” has two zone contact counters associated with them. The white
numbers “
B
” are the total number of times that that zone has detected contact since the
machine was installed. The orange numbers “
C
” are the number of times that a zone has
detected contact since this diagnostic was most recently started. Each time the diagnostic is
run, the orange numbers reset to 0.
Touch the reset button “
D
” to manually reset the orange numbers to 0.
When a zone detects contact, the zone on the machine icon lights up “
E
,” both the total and
current contact counters increase, and the machine beeps.
To exit the diagnostic and return to the Diagnostics main screen, touch “Return” “
F
.”
D
C
E
A
F
B
