13
11. Return starter grip handle slowly. DO NOT let
rope “snap back” against starter.
NOTE
: Always keep the throttle lever in the
“Fast” ( ) position when operating the
pressure washer.
How to Stop your Pressure Washer
1. Release spray gun trigger and let engine idle
for two minutes.
2. Move throttle to SLOW (
) position, then
STOP ( ) position.
3. ALWAYS point spray gun in a safe
direction, press red button and squeeze
spray gun trigger to release retained high
water pressure.
iMPORTANT
: Spray gun traps high water
pressure, even when engine is stopped and
water is disconnected.
Automatic Cool down System (Thermal Relief)
If you run the engine on your pressure washer
for 3-5 minutes without pressing the trigger on
the spray gun, circulating water in the pump can
reach temperatures above 125°F. The system
engages to cool the pump by
discharging the
warm water onto the ground.
How to use Accessory Tray
The unit is equipped with an accessory tray with
places to store your spray gun, nozzle extension
and quick connect spray tips, as shown in
Figure 15. The tray includes a hook at the front
to store your high pressure hose.
1. Place nozzle extension through hole on
accessory tray.
2. Place spray gun through hole on accessory
tray on right side of unit.
3. Insert multi–colored spray tips in spaces
provided in accessory tray.
4. Hang high pressure hose on hook attached to
accessory tray on front of tray.
NOTE
: The extra hole in the tray is for storing
a utility brush. The extra clip in the tray is
for storing a turbo nozzle. The brush and
turbo nozzle are NOT included with your
pressure washer. You can buy these items as
optional accessories.
Figure 15
WARNiNG
: Contact with muffler area can
result in serious burns.
Exhaust heat/gases can ignite
combustibles, structures or damage
fuel tank causing a fire.
DO NOT touch hot parts and AVOID hot
•
exhaust gases.
Allow equipment to cool before touching.
•
Keep at least 5 feet (152 cm) of
•
clearance on all sides of pressure washer
including overhead.
WARNiNG
: The high pressure stream of
water that this equipment produces
can cut through skin and its underlying
tissues, leading to serious injury and
possible amputation.
Spray gun traps high water pressure,
even when engine is stopped and water is
disconnected, which can cause injury.
Keep high pressure hose connected to pump
•
and spray gun while system is pressurized.
ALWAYS point spray gun in safe direction,
•
press red button and squeeze spray gun
trigger to release high pressure, evey time
you stop engine.
