Nozzle must be inspected for proper operation and function according to this checklist before each use.
Check that:
1)
2)
3)
4)
5)
6)
7)
8)
There is no obvious damage such as missing, broken or loose parts, damaged labels etc.
Gasket grabber is free of debris.
Coupling is tight and leak free.
Valve operates freely through full range and regulates flow.
"OFF" position does fully shut off and flow is stopped.
Nozzle flow is adequate as indicated by pump pressure and nozzle reaction.
Shaper turns freely and adjusts pattern through full range.
Shaper turns into full flush and out of flush with normal flow and pressure restored.
10.0 INSPECTION CHECKLIST
Any Ultimatic, Mid-Matic or Handline nozzle failing any part of the
inspection checklist is unsafe and must have the problem corrected
before use. Operating a nozzle that fails any of the above inspections is a
misuse of this equipment.
WARNING
LIN-030 November 14, 2008 Rev 10
©Copyright Task Force Tips, Inc. 2002-2008
2351 Industrial Drive • Valparaiso , IN 46383-9511 USA
800-348-2686 • 219-462-6161 • Fax 219-464-7155
Made in USA • www.tft.com
TASK FORCE TIPS, Inc.
