manualshive.com logo in svg

Tascam MX-2424, Руководство пользователя

Поделиться
Скачать
Tascam MX-2424 Скачать руководство пользователя страница 64

Updating MX-OS on an MX-2424

Whenever a new version of MX-OS becomes available it will be posted to the TASCAM Web site for
download (http://www.tascam.com).  Archived files for both Mac and PC will be posted along with
documentation in PDF format (as needed).  The new version of MX-OS will be written to the TL-Media
card, which is then used to update the flash ROM in the MX-2424.  The steps below detail the process of
updating the version of MX-OS in an MX-2424:

1.

 

Download the latest version of MX-OS from the TASCAM web site.  Place the file into the desired
folder that will contain the MX-OS file and its documentation.  Extract the MX-OS file and
documentation files into that folder.

2.

 

Launch the ViewNet GUI application.

3.

 

Insert the TL Media card that will be used to store the new MX-OS and update the MX-2424.  (NOTE:
Any data on the TL Media card will be lost during this process.)

4.

 

From the ViewNet Network Screen highlight the MX-2424 that has the TL Media card inserted or
make it active in the Edit Screen by clicking on its Connection button as shown below.  The button will
turn blue and the MX-2424 will appear in the Edit Screen.

5.

 

Select Update MX Software from the Machine Menu.

6.

 

Locate the MX-OS file that was created by the self-extracting archive and Open it.

7.

 

The TL Media card will be formatted, this takes about 2 minutes.  (NOTE: This may take longer on a
Macintosh. When using a Mac, all applications that are using the Ethernet port must be shut down.)
Then the new version of MX-OS will be written to the TL Media card.  The LCD will display the
progress of writing data blocks to the TL Media card.  When finished, 

Update Software Completed

 will

be displayed in the LCD and instructions will be displayed in ViewNet.

8.

 

Leave the TL Media card in its slot and cycle the power on the MX-2424.  The Flash ROM in the MX-
2424 will be updated with the MX-OS from the TL Media card.

9.

 

When the update is completed, cycle the power on the MX-2424 again to complete the update.

10.

 

If the RC-2424 is connected then its software will be automatically updated.

64

Содержание MX-2424




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды