Tascam MX-2424 Скачать руководство пользователя страница 45

Страница: 45 / 67

701

Rec Disk

The setting of this Menu determines the target disk for recording audio files. Only one target disk is possible at a

time for audio recording. Disks are represented by their SCSI ID numbers.

702

Rec Disk Status

This is a detailed display indication only of the format of the currently selected Record Disk. It is not possible to

make changes to any setting from this menu. The possible indications are:

Apple HFS

Unkown Format

703

Rec Disk Free

This is a dynamic display indication of approximate recording time left on the disk based on the number of tracks

selected for recording. It is updated as more tracks are record-enabled.

710

Disk Initialize

This Menu Utility will initialize the selected disk. This is a fast way to erase an entire disk. INITIALIZING A

DISK WILL ERASE ALL AUDIO ON THE DISK. THERE IS NO UNDO. Before a disk is initialized it must be

un-mounted.

The SCSI ID location of the disk to be initialized must first be chosen. Use

TRIM [40]

to select the correct disk:

Init Disk 0

Thru

Init Disk 6

Then the MX-2424 will prompt for confirmation.

The MX-2424 will initialize the disk to the Apple HFS disk format (Mac OS Standard). If it is necessary to mount

the disk on a Macintosh then the disk may be initialized on the Macintosh to Mac OS Standard before recording

audio on the MX-2424. If audio has been recorded on a disk with the MX-2424 and it is later determined that the

disk must be mounted on a Macintosh then Hard Disk Toolkit 3.0 must be used to install driver software on the

disk without affecting the recorded audio. It is necessary to restart the Macintosh to complete driver installation.

Содержание MX-2424




































































Результаты поиска

Содержание MX-2424

Отзывы:

Похожие инструкции для MX-2424

Бренды по названию

Популярные бренды

Tascam MX-2424, Руководство пользователя

Результаты поиска

Содержание MX-2424

Отзывы:

Похожие инструкции для MX-2424

Бренды по названию

Популярные бренды