Tascam MX-2424 Скачать руководство пользователя страница 34

Страница: 34 / 67

To Back Up a Project to Travan Tape

Be sure all SCSI devices are properly connected.

Press SHIFT then UNMOUNT to un-mount all

drives.

Insert a blank tape into the Travan drive. The

tape will stick out of the drive about one inch.

Always grasp the tape by the sides as shown

below.

Press MOUNT to mount all drives. This may

take a few minutes. Do not attempt to remove

the Travan tape while it is mounted or in motion.

Press PROJ, then use the UP/DOWN Arrow

keys until

Smart Copy

is displayed in the LCD.

Press PROJ again or YES.

Available Project names will be displayed in the

LCD. Use the UP/DOWN Arrow keys to select

the source project to be backed up then press

YES. (SCSI ID location of the project will be

indicated in brackets. If the project title is so

long that the brackets are not displayed it is

possible to turn the SHTL Ring to the right to

scroll the display until the brackets can be seen.)

“Smart Copy to:”

will be displayed in the LCD

prompting for a SCSI ID of the Travan drive.

Press TRIM and use the UP/DOWN Arrow keys

to select the SCSI ID of the destination drive.

Press YES.

“Smart Copy as:”

will be displayed in the LCD

prompting for a new project name (if desired).

Press YES to accept the current project name or

press TRIM to change it. Confirm your

selection.

”EraseTape? No=Append”

will be displayed in

the LCD.

Press YES to completely erase the

currently mounted Travan tape and begin a

new backup. Press NO to add to an existing

backup. There is no Undo for this function.

10.

The status of the backup will be displayed in the

LCD until it is completed. (NOTE: If projects

already exist on the tape the backup process will

begin after the tape’s directory information has

been loaded into the MX-2424’s memory, this

may take a few minutes. When completed, press

SHIFT then UNMOUNT to remove the Travan

tape.)

To Restore a Project from Travan Tape

Be sure all SCSI devices are properly connected.

Press SHIFT then UNMOUNT to un-mount all

drives.

Insert the tape into the Travan drive that contains

the project to be restored.

Press MOUNT to mount all drives. This may

take a few minutes. Do not attempt to remove

the Travan tape while it is mounted or in motion.

Press PROJ, then use the UP/DOWN Arrow

keys until

Smart Copy

is displayed in the LCD.

Press PROJ again or YES.

Available Project names will be displayed in the

LCD. Use the UP/DOWN Arrow keys to select

the source project to be restored the press YES.

Projects located on the Travan tape will be

indicated by

“BU”

displayed in brackets along

with the SCSI ID of the device where the project

is located. If the project title is so long that the

brackets are not displayed it is possible to turn

the SHTL Ring to the right to scroll the display

until the brackets can be seen.

“Smart Copy to:”

will be displayed in the LCD

prompting for a SCSI ID of the destination hard

drive. Press TRIM and use the UP/DOWN

Arrow keys to select the SCSI ID of the

destination drive. Press YES.

“Smart Copy as:”

will be displayed in the LCD

prompting for a new project name (if desired).

Press YES to accept the current project name or

press TRIM to change it. Confirm your

selection.

The status of the restore will be displayed in the

LCD until it is completed. When completed

press SHIFT then UNMOUNT to remove the

tape.

SPECIAL NOTES ABOUT TRAVAN

Tape spanning will be supported in a future release of MX-

OS. Currently if a project backup will require more space

than is available on a tape then a new tape must be used.

Currently maximum backup capacity to Travan is 10

gigabytes.

Only Travan tapes that specify 10 gigabytes uncompressed

may be used by the MX-2424.

Содержание MX-2424




































































Результаты поиска

Содержание MX-2424

Отзывы:

Похожие инструкции для MX-2424

Бренды по названию

Популярные бренды

Tascam MX-2424, Руководство пользователя

Результаты поиска

Содержание MX-2424

Отзывы:

Похожие инструкции для MX-2424

Бренды по названию

Популярные бренды