manualshive.com logo in svg

Tascam MMP-16, Руководство пользователя

Владелец Tascam MMP-16 может бесплатно скачать Руководство пользователя для данного устройства на нашем сайте. Это позволит вам получить полную информацию о функциях и настройках MMP-16. Просто загрузите руководство с нашего сайта manualshive.com и начните использовать ваше устройство эффективно.

Поделиться
Скачать
background image

MMP-16  Tascam MMP-16 Owner’s Manual • Chapter 1 • General Information

10

The MMP-16 will directly play back material created on Digidesign Pro Tools

 or WaveFrame

 digital

audio workstations, as well as OMF Compositions which reference Sound Designer II audio media files.
The disk drive or drives containing edited Session, Project, or OMF files are simply “unplugged” from
the workstation and then “hot-plugged” into the MMP-16, using the standard internal Kingston hard drive
carrier, or otherwise connected to the MMP-16’s external SCSI port. Once the drive(s) are mounted by
the MMP-16, tracks from one or more projects may be loaded as required for the mix session. Sound files
of the same or different audio formats may thus be played back simultaneously from one or more drives.

When the MMP-16 is turned on for the first time, the system default operating parameters are installed,
and the machine is placed into the Normal state (see the Functional Overview below). Users can also save
up to ten settings files that have MMP-16 parameters “customized” or set for a particular application.
These settings files are stored on the internal hard drive so that they can be used to instantly reconfigure
the MMP-16 between mix sessions. The MMP-16’s operating parameters can be manually changed
before or even during a mix session, through menu selections. Optional password protection may be used
to prevent some parameters from being changed inadvertently.

  Hardware Overview

The MMP-16 comes standard with one removable Kingston drive carrier. The Kingston carrier can hold a
standard SCSI drive for recording and playback of audio tracks. An internal IDE hard drive holds the
operating system, the MMP-16 software, and the parameter settings files. Additional external SCSI drives
can be connected and (after power-up) accessed by the MMP-16. This eliminates having to pre-combine
tracks from multiple drives onto a single drive. A list of approved media drives is given in Appendix B.

The MMP-16 is based on a standard Intel Pentium™ processor-based PC motherboard, with
integral PCI and ISA bus slots running under an industry-standard operating system. The MMP-16

DSP, synchronization, and audio interface boards plug directly into this PC motherboard. There is a
Lithium battery # CR2032 for the CMOS circuit on the motherboard. 

Caution: Battery May Explode if

Mistreated. Do Not Recharge, Disassemble, or Dispose of in Fire.

 The MOC (MMP-16 digital-to-

analog Output Converter) boards are in their own shielded cage, connected to the AO-16 (Analog Output)
card via ribbon cables. The PRX (DSP) card performs the audio processing for the MMP-16. A standard
Symbios SCSI-2 controller card also plugs into the PCI bus. The Sync card, the UI/B (User
Interface/Biphase) card, the AO-16 (Analog Output) card, and the DO-16 (AES/EBU Digital Output) card
are all plugged into the ISA bus. The Biphase Operations Board (BOB) occupies a slot on the back panel
to provide connections for the system’s four Biphase inputs and one Biphase output. It is attached to the
UI/B card via a ribbon cable and is not plugged into a slot.

Very high quality 20-bit converters on all analog outputs assure excellent audio fidelity. The MMP-16
uses 24-bit internal digital resolution for all digital audio processing. The MMP-16 plays back audio
stored in standard linear 16-bit or 24-bit sound files. The MMP-16 can read StudioFrame or WaveFrame
sound files as well as Sound Designer II files, AIFC files, and .WAV files, in 16 or 24-bit resolution.

The MMP-16 front panel contains 44 soft-touch keys with most of the common dubber and audio
playback functions available through one or two keystrokes. There are also five large illuminated motion
control buttons (Play, Stop, FF, Rew, Reverse Play) for track playback and “play head” locating, and an
Online button for setting the MMP-16 offline (as a local machine) or online (as a synchronized slave or a
master machine). When the MMP-16 is set as a slave, it can chase SMPTE time code (LTC), biphase
(film tach), a TimeLine Lynx™ module, or another MMP-16 or MMR-8.

Содержание MMP-16
































































































































Отзывы:

Нет отзывов

Похожие инструкции для MMP-16

DANE-ELEC SO ROAD MOVIE CAR PACK Quick Start Manual preview
SO ROAD MOVIE CAR PACK
Бренд: DANE-ELEC Страницы: 14
DANE-ELEC SO ROAD MOVIE Datasheet preview
SO ROAD MOVIE
Бренд: DANE-ELEC Страницы: 2
DANE-ELEC SO WORLD TV - Quick Start Manual preview
SO WORLD TV -
Бренд: DANE-ELEC Страницы: 16
DANE-ELEC SO G-STREAM - Quick Start Manual preview
SO G-STREAM -
Бренд: DANE-ELEC Страницы: 16
DANE-ELEC SO SPEAKY - Datasheet preview
SO SPEAKY -
Бренд: DANE-ELEC Страницы: 2
DANE-ELEC SO XSTREAM FULL HD - Datasheet preview
SO XSTREAM FULL HD -
Бренд: DANE-ELEC Страницы: 2
Viking PF--6A Technical Practice preview
PF--6A
Бренд: Viking Страницы: 4
Lindy 38363 User Manual preview
38363
Бренд: Lindy Страницы: 14
V2 RXP4 Manual preview
RXP4
Бренд: V2 Страницы: 4
B&B Electronics McPC-Gigabit Operation Manual preview
McPC-Gigabit
Бренд: B&B Electronics Страницы: 5
Linn Majik CD Owner'S Manual preview
Majik CD
Бренд: Linn Страницы: 34
Marantz SA-14S1 (Spanish) Manual De Usuario preview
SA-14S1
Бренд: Marantz Страницы: 40
Marantz SA-KI-PEARL-LITE User Manual preview
SA-KI-PEARL-LITE
Бренд: Marantz Страницы: 36
M-Audio Biport 2x4 Manual preview
Biport 2x4
Бренд: M-Audio Страницы: 48
B&B Electronics McPC MediaLinX User Manual preview
McPC MediaLinX
Бренд: B&B Electronics Страницы: 15
Visionary Solutions Duet D-2 User Manual preview
Duet D-2
Бренд: Visionary Solutions Страницы: 57
Mach Speed TRIO CLIP User Manual preview
TRIO CLIP
Бренд: Mach Speed Страницы: 16
Majestic BT 8057R MP4 User Manual preview
BT 8057R MP4
Бренд: Majestic Страницы: 28

Бренды по названию

Популярные бренды

Загрузить еще бренды