manualshive.com logo in svg

Tascam MMP-16, Руководство пользователя

Владелец Tascam MMP-16 может бесплатно скачать Руководство пользователя для данного устройства на нашем сайте. Это позволит вам получить полную информацию о функциях и настройках MMP-16. Просто загрузите руководство с нашего сайта manualshive.com и начните использовать ваше устройство эффективно.

Поделиться
Скачать
background image

MMP-16Tascam MMP-16 Owner’s Manual • Chapter 5 • MMP-16 System Applications 

75

  Setup Menu Details

This section contains detailed notes on the operation of some important Setup menu parameters.

  Control Mode

The MMP-16 will always operate in one of seven Control modes. The default Control mode, which is
how the MMP-16 starts up when the unit is first installed, is called the Local/Bus Control Mode.

To change the Control mode, select Setup menu 000 (press SETUP to display the Setup menus).
Whenever the MMP-16 is powered up, the first menu displayed will always be menu 000 (“Control
Mode”). Afterwards, the menu displayed when entering Setup mode is the last menu displayed. Once
Setup menu 000 (“Control Mode”) is displayed, press TRIM to change the Wheel and the Up/Down
arrow keys to scroll through the seven menu choices under Setup menu 000. Once the desired operating
mode is displayed, press STO (the Store key) to select that choice. This immediately switches the various
parameters to the new control mode, typically causing several LEDs to change status according to the
new parameters. To exit Setup mode, press SETUP or the CLR (Clear) key.

Following is a more detailed description of the seven control modes that are supported by the MMP-16:

  

Local/Bus

In local mode (offline) the MMP-16 functions like other stand-alone digital playback devices. No external
sync signals are required. The front panel transport keys offer direct control over system audio playback.
When placed into bus (online) mode, the MMP-16 can function as either a master or a slave to other
MMR bus or Lynx bus devices, as set through Setup menu 110 (MMR Bus) and menu 120 (LYNX bus).

  

Time Code Chase

In Time Code Chase, the MMP-16 will slave to the time code coming from one of the time code inputs on
the rear panel (VITC In or Time Code In) when it is placed Online. In this mode the time code input must
have valid time code in order for the MMP-16 to chase, lock, and synchronize itself to the incoming time
code. Pressing any of the transport keys will take the MMP-16 off-line and allow local control at any
time. Placing the MMP-16 back online will cause it to lock to and chase the selected time code once
again.

  

Biphase Chase

In Biphase Chase, the MMP-16 chases, interlocks, and synchronizes to a biphase or tach/dir. signal on
one of the four Biphase Inputs (the active input is determined by the Sync Group number set in menu
100). The system locks and plays audio at  speeds from 0 to 1.5 times play speed in both forward and
reverse directions. The MMP-16 can then serve as a master for other devices on the MMR or Lynx buses.

  

Biphase Transport

The MMP-16 functions as the master for a film projector connected to the Biphase Output. The front
panel transport keys will control both the MMP-16 and the film projector (and any other devices slaved to
the MMP-16 Biphase output). The MMP-16 internally chases the biphase signal so the audio functions
match those of Biphase Chase mode.

Содержание MMP-16
































































































































Отзывы:

Нет отзывов

Похожие инструкции для MMP-16

Panasonic DP-UB420 Basic Owner'S Manual preview
DP-UB420
Бренд: Panasonic Страницы: 12
D&H DH05C User Manual preview
DH05C
Бренд: D&H Страницы: 70
HANTZ HELIOS H4000 Manual preview
HELIOS H4000
Бренд: HANTZ Страницы: 4
SONIQ Qplay QPD555B Insrtuction Manual preview
Qplay QPD555B
Бренд: SONIQ Страницы: 12
Huahuan Electronics H0FL-EthMux.SA1601 User Manual preview
H0FL-EthMux.SA1601
Бренд: Huahuan Electronics Страницы: 55
Astell & Kern PPE12 Instruction Book preview
PPE12
Бренд: Astell & Kern Страницы: 56
DAD AX32 User Manual preview
AX32
Бренд: DAD Страницы: 31
Archos XS200 - Gmini 20 GB Digital Player Specifications preview
XS200 - Gmini 20 GB Digital Player
Бренд: Archos Страницы: 2
Samlexpower SDC-23 Owner'S Manual preview
SDC-23
Бренд: Samlexpower Страницы: 3
Kramer FC-340S User Manual preview
FC-340S
Бренд: Kramer Страницы: 25
Jensen JMC-326 Instruction Manual preview
JMC-326
Бренд: Jensen Страницы: 16
Primary ICT EASI-LISTENER IT00015 User Manual preview
EASI-LISTENER IT00015
Бренд: Primary ICT Страницы: 5
Wentronic Goobay 67825 User Manual preview
Goobay 67825
Бренд: Wentronic Страницы: 4
Interlogix MCR300-1S User Manual preview
MCR300-1S
Бренд: Interlogix Страницы: 20
B.M.C. DAC I Quick Start Manual preview
DAC I
Бренд: B.M.C. Страницы: 8
M-system 18KVS Instruction Manual preview
18KVS
Бренд: M-system Страницы: 3
Delta-Opti OMG1-SM User Manual preview
OMG1-SM
Бренд: Delta-Opti Страницы: 3
Roadstar CLR-2540UMPSL Instruction Manual preview
CLR-2540UMPSL
Бренд: Roadstar Страницы: 28

Бренды по названию

Популярные бренды

Загрузить еще бренды