Tascam DA-302, Руководство пользователя

Страница: 9 / 33

10
6
RESET/MEMO (ABS) key
…
When pressed with the counter mode set to Tape
Counter, the counter value is reset to "00 00".
…
When pressed with the counter mode set to ABS, the
current tape position point is stored in memory for
later direct access.
7
Display
Displays different information regarding the unit’s sta-
tus. The information displayed varies according to the
mode.
1 1, 2
Shows the deck selected by the SELECT 1/2 key.
2 Time display
Time selected by the COUNTER MODE key is
shown. Also, menu contents are shown.
3 PNO
Lights when the program number is shown in the
program number/margin display.
4 Program number/margin display
…
When performing recording/rec-pause/sampling
monitor, or when the MARGIN RESET key is
pressed during playback, a margin value is shown.
The margin to the full scale level is shown in the
range 0 dB to 39 dB. Until the MARGIN RESET
key is pressed, the margin value for the input sig-
nal at maximum is maintained. If the margin
value exceeds the full scale level, 0 blinks.
…
In cases than those above, the program number is
shown.
5 MARG
Lights when the margin value is shown in the pro-
gram number/margin display.
6 SLAVE
If more than one DA-302 is connected, and this
deck is set to SLAVE, this indicator lights.
7 DIGITAL IN
Lights when "DIGITAL" is selected with the
INPUT switch.
8
Dubbing mode display
DUB MODE HIGH:
Lights in the High-Speed Dubbing mode.
DUB MODE NORM:
Lights in the Normal-Speed Dubbing mode.
DUB MODE PGM:
Lights in the Program Dubbing mode.
DUB MODE APPEND:
Lights in the Append Dubbing mode.
9 AUDIO ID
Lights when the Start ID Auto Writing mode is
selected.
4-1. Front panel
1
POWER switch
2
SKIP keys
For skip search. (
ú
p.24)
3
STANDBY key
With this key ON (LED lit), the Play-Pause mode is
automatically engaged after skip search, direct search,
or location search.
4
EJECT key
Press to load or unload the cassette.
5
COUNTER MODE key
To switch the time mode on the time display. Each time
this key is pressed, the mode changes in the following
order.
ABS time
∑
PGM time
∑
REMAIN time
∑
Tape counter
…
ABS (absolute) time:
Shows the elapsed (absolute) time from the begin-
ning of the tape up to the current position in hours,
minutes and seconds.
·
In the Long Play mode, the displayed time differs
from the actual time. Double the displayed time to
get the actual time.
…
PGM (program) time:
Shows the elapsed time from the beginning of each
program (start ID) in hours, minutes and seconds.
…
REMAIN time:
Shows the tape remaining time.
·
If a "TOC (Table Of Contents)" is written on the
tape (such as a commercially-available music
tape), the remaining time is shown in hours, min-
utes and seconds. If there is no "TOC", the time is
shown in hours and minutes.
·
When "- -- --" is displayed, it means that the
remaining time is being calculated. Once the cal-
culation is complete, the time is shown.
·
In the Long Play mode, the displayed time differs
from the actual time. Double the displayed time to
get the actual time.
…
Tape counter:
Counts according to the tape running.
·
When the "Dig Out" menu is set to "AES/EBU"
(
ú
p.28), time code is shown if it is written on the
tape.