12
— TASCAM CD-BT1MKII
Making connections
Connecting a bass guitar (BASS
IN)
BASS GUITAR
Connect a bass guitar to the
BASS
IN
jack.
Set the
BASS IN
switch to either
PASSIVE
or
ACTIVE
at the side of
the unit according to the type of
your bass guitar.
The
BASS IN
jack of the CD-
BT1MKII accepts unbalanced
input signals. Use a ¼ inch mono
phone plug.
Adjusting the input level
Use the
INPUT
control to adjust the
level of the input signal from the
BASS
IN
jack.
Inputting signals from external
devices (
LINE IN
)
The
LINE IN
jack accepts a stereo
mini-jack plug (3.5mm).
The input level at the
LINE IN
jack
cannot be adjusted on the CD-
BT1MKII, so adjust the output
level on the external device you
have connected.
LINE OUT OF EXTERNAL DEVICE
WARNING
NEVER connect a bass guitar amplifier to the
CD-BT1MKII’s
BASS IN
jack, as you will
damage your equipment if you do this.
Adjusting the output level after
adding built-in effects
Press and hold down the
EFFECT/
EDIT
key to open the Effect menu, and
press the
NEXT
or
PREV
key to choose
LVL
and use the
UP
and
DOWN
keys to
set the output level between 0 and 64.
Adjusting mix balance between
bass guitar and CD
Press and hold down the
TUNER/
SETUP
key to open the Setup menu,
and press either the
NEXT
or
PREV
key
to choose
MIX
. You can set the mix bal-
ance using values between B (Bass) 10
– B1, 0, C (CD) 1 – C10.
