Tascam CC-222, Руководство пользователя

Страница: 12 / 42

2 – Features and controls—Rear panel features
12
TASCAM CC-222 Owner’s Manual
M
OPEN/CLOSE key
Opens and closes the
disc tray.
N
DISPLAY key
Changes the time display for
the disc recording and playback.
O
FINALIZE key
Used when finalizing record-
able discs.
P
ERASE key
Used when erasing data from
CD-RW discs.
Q
SYNC REC key
Turns synchronized record-
ing of the disc recorder on and off.
R
MENU key
Repeated presses of this key cycle
through the different menu options.
S
MULTI DIAL
Used to select and confirm
menu settings etc. (turn to make the setting, push to
confirm), and also as a track search facility when
playing back discs.
T
Disc tray
Open and close this tray with the
OPENCLOSE key
M
to load and unload discs.
U
REMOTE SENSOR window
Receives the
infra-red signals from the remote control unit. Do not
block this window if you are using the remote control
unit.
V
PITCH CONTROL knob
This is a center-
detented knob which allows the tape speed (and
therefore the pitch) to be changed by ±12%.
W
REV MODE switch
This three-position
switch allows the choice of single-side or bidirec-
tional playback and recording (
Ä
or
Ê
), or (
ä
)
continuous playback only (not recording).
X
Dolby NR (OFF/ON) switch
Use this
switch to turn the Dolby noise reduction off and on
for the cassette deck.
Y
CD-TAPE CONT PLAY switch
Use this
to turn continuous playback (alternating between
disc and cassette) on and off.
Z
CD TIMER (OFF/PLAY) switch
Use this
switch to turn the CD timer option on or off (when
this is in the
PLAY
position, turning on the machine
with a disc inserted will automatically start playback.
a
CD STOP key
Stops CD playback or disc
recording,
b
CD PLAY key
Starts CD playback or record-
ing (from record ready mode).
c
CD PAUSE key
Pauses or unpauses CD
playback or recording (starts recording from record
pause mode).
d
CD RECORD key
places the disc in record
ready mode and performs manual track incrementing
while recording.
e
MONITOR (TAPE 1/1+2/2 DISC)
switch
This switch selects the source for the head-
phone outputs as either the cassette deck, the disc
recorder, or a mixture of both.
f
PHONES jack and volume control
Connect a standard pair of stereo headphones to this
1/4” jack, and adjust the level with the control.
Rear panel features
The CC-222 line analog inputs and outputs all oper-
ate at the –10 dBV level. For details of input and out- put impedances, etc., consult the specifications.