10
TASCAM US-2x2/US-4x4
Connecting the power
8
US-4x4
Connect the power to the US-4x4 as shown below.
o
The AC adapter for the US-4x4 includes two types of outlet
plugs. Attach the type of plug that matches the power outlet
that you are using.
Power outlet
PS-P1220E (included)
DC plug
8
US-2x2
Normally, when a US-2x2 is connected to a computer, it will
operate using USB bus power, so a separate power supply is
not necessary. To power this unit when it is connected to an
iOS device, however, you must connect a TASCAM PS-P520E AC
adapter, TASCAM BP-6AA external battery pack or other power
supply device to the DC IN 5V connector. In this case, connect
the power source to the unit as shown below.
DC plug
Power outlet
TASCAM PS-P520E or
BP-6AA
CAUTION
• Always use the included PS-P1220E AC adapter with the
US-4x4.
• We highly recommend using a PS-P520E AC adapter or
BP-6AA battery pack (both sold separately) with the US-2x2.
When using another external power supply device, use one
with the following specifications.
• Power supply voltage: 5 V
• Power supply current: 700 mA or more
Using a power supply device with specifications other than
the above could cause malfunction, overheating, fire or
other problems. If trouble should occur, stop using the unit
and contact the retailer where you purchased it or a TEAC
service center to request repair.
Changing the outlet plug (US-4x4 only)
$
%
2
1
5
3
4
1
Move the latch on the AC adapter in the direction of the
arrow.
2
Pull off the outlet plug.
3
Replace it with the other outlet plug (A or B).
4
Move the latch on the AC adapter in the direction of the
arrow again.
5
Attach the outlet plug to the AC adapter.
This completes changing the outlet plug.
After changing the outlet plug, confirm that is not loose or
crooked and that everything is normal before plugging it
into an outlet
CAUTION
Do not use the adapter if there is anything abnormal about
the plug after changing it. Use when the plug is abnormal
could cause fire or electric shock. Contact the retailer where
you purchased the unit or a TEAC service center (on the back
cover) to request repair.
4 – Preparation
