24
LUBRICATION BEFORE EACH USE
1. Driveline Universal Joints
a. Apply multi-purpose grease with a grease gun.
2. Driveline Guard
b. Apply 2-3 shots of multipurpose grease with
grease gun to plastic fitting.
3. Driveline Profile
c. Disconnect PTO Driveline.
d. Pull two sections apart.
e. Apply thin coat of multi-purpose grease
to inside of female section.
f. Re-assemble sections.
NOTE:
Pull each section to be sure driveline and shields
are securely connected. Make certain PTO shielding is
in good condition. Do not grease outer or inner plastic
shields.
4. Tail wheel Pivot Tube
g. Apply multi-purpose grease with grease gun.
5. Tail wheel
h. Apply multi-purpose grease with grease gun.
6. Gearbox
i. Check oil level by removing oil level check plug on side
of gearbox.
j. Add 80W/90 or 85W/140 gear oil if necessary to bring
oil level to check plug hole.
OBSERVE LUBRICATION SYMBOLS
Lubricate with multipurpose grease.
(1) Before Each Use
(2) Before Each Use
(3) Before Each Use
(4) Before Each Use
(5) Before Each
Use
(6) Before Each Use
3d. Pull two sections apart.
LUBRICATION AND MAINTENANCE