Tarter CattleMaster 12 Series, Инструкции по использованию

Страница: 6 / 6

Hydraulic Chute
USAGE INSTRUCTIONS
A. Open individual side doors
to access any part of the
animal by releasing access lock
on the top of desired door.
Note:
To remove door – while
opened, lift door up and out
from chute frame.
B. Dally Hooks (located on both sides of chute’s exit)
can be used to tie the animals head to the side.
C. Neck Access Area – Rubber flap is flexible, allowing easy
access to neck and shoulder area of animal.
D. To access lower part of animal, turn tabs
above the desired split-bottom panel and
fold panel downward.
To close panel, raise panel upward and turn
tab down to lock panel in place. Note: To
remove door completely, open panel and
slide to the side.
F. Blinders (located at the foot of the chute’s exit)
reduces the animal’s desire to lower their head.
G. When the animal is in the
chute and caught, insert
backup bar in horizontal
opening of chute. Once
bar is secure in both
sides, slide bar forward in
ratchets until it is against
back of animal. Backup bar
is stored near chute’s
entrance.
9. Access Features
For further information regarding your CattleMaster Series 12
Hydraulic Chute, go to www.TarterUSA.com.
E. Neck Extenders – Designed to hold animal’s head
straight. Perfect for tagging ears and examining
head. Loosen bolt at top and bottom of each
extender to slide in or out to fit various size
animals. Can be removed.