Tarmo TAR012, Инструкция по эксплуатации

Страница: 23 / 30

23
-
Grip the appliance as lightly as possible (while still keeping safe control of it). Let the ap-
pliance do the work.
-
To reduce vibration, maintain the appliance as explained in this manual. If any abnormal
vibration occurs, stop use immediately.
TECHNICAL DATA
Max. Cutting Diameter Ø270 mm
Min. Cutting Diameter Ø25 mm
Max. Cutting Length 1000 mm
Min. Cutting Length 200 mm
Blade Size Ø700 x 3.2 mm
Maximum RPM for Blade 1440 rpm
Power Source PTO Drive
PTO Drive Ratio 3.3:1
PTO Output Speed 540 rpm
Wheel dimension 200 x 44 mm
Sound pressure level (without load), LpA 95.6 dB(A), K = 4 dB
Sound pressure level (loaded), LpA 107.4 dB(A), K = 4 dB
Always wear hearing protector!
The specified values are emission values and therefore should not at the same time be
reliable working site values. Although there is a correlation between emission and
immission levels, it cannot unfailingly be derived if extra precautions need to be taken or
not. Factors, which influence the actual available immission value on working site, include
the peculiarties of working area, other sources of noise, e.g. the number of machines and
other adjoining processes. The allowed working values could vary from country to
country. However, the information should qualify the user to be able to make an
estimation of the dangers and risks.
This product fulfils the requirements of quality class HA 2807.