Tarlan Technical Little Cracker, Руководство по установке

Страница: 17 / 23

Page 17 of 23 Rev B Mar 2012
Dektite roof flashing for uneven or fiberglass roof, or for ease of installing
This is our recommended type of seal then drill the holes all at 150mm diameter and skip steps 4 to
8.
If using a Dektite or similar cut the opening to 150mm and ensure there is at least 150mm of
the SS liner protruding to enable cowl to attach. The Dektite will need to be cut on the 140 –
150mm diameter as marked on the “easily identified sizing”