Targetmax® V.2.0 Attendance System Hardware Suite Guide
9
8.1.2 Machine
No.
Setting
Remark
1 - 255
The sole identity No. of the machine in case of
multi online operation
Initial
1
•
Be noted the system can not run correctly if there are different devices have
the same Machine No., in this case, confusion will occurs to the software of
“Attendance system” during recording data.
8.1.3 Baud
rate
Setting
Remark
9600
The communicating baud rate is 9600bps
19200
The communicating baud rate is 19200bps
38400
The communicating baud rate is 38400bps
Initial
38400
•
The Baud rate must be the same as the PC, otherwise it can not realize
communicating
8.1.4 Language
Setting
Remark
Chinese
LCD display traditional Chinese
English
LCD display English
Initial
English
Targetmax® V.2.0 Attendance System Hardware Suite Guide
10
8.1.5 Locking
delay
Setting
Remark
Yes
Output locking control signal after confirmation
No
Do not output locking control signal after
confirmation
Initial
No
•
Only after successful login as well as with setting of outputting locking
control signal. It is recommended set “No” if no need.
8.1.6
Auto Shut Down
Setting
Remark
No
Do not turn off automatically
1—255
Turn off automatically unless no any operation
exceeding times’ limit, the time unit is “minute”
Initial
No
8.1.7 Time
setting
Setting
Remark
Time setting
Set the current time of the machine
Initial
Time is the same as the controlling PC during
production, which can be also set in the software
of Attendance system
