Targa Extender, Руководство пользователя

Страница: 77 / 127

59
To configure a drive that is not an IDE type drive, if it is User .
Manually enter the number of cylinders, heads and sectors per track
for your drive. Refer to your drive’s documentation or look on the
drive if you need to obtain this information.
ATAPI Removable if the drive is an ATAPI type drive that supports
high-capacity storage diskettes. This option would be used in the
event that you have swapped the CD-ROM or DVD-ROM for an
ATAPI type removable drive.
Cylinders
This field configures the drive’s number of cylinders. Refer to your
drive’s documentation or look on the drive to determine the correct
value to enter for this field. If the system has successfully detected
the drive automatically, there is no need to adjust this field. In order
to make changes to this field, the Type field must be set to User.
Heads
This field configures the drive’s number of read/write heads. Refer to
your drive’s documentation or look on the drive to determine the
correct value to enter for this field.
If the system has successfully detected the drive automatically, there
is no need to adjust this field. In order to make changes to this field,
the Type field must be set to User.
Sectors
This field configures the drive’s number of sectors per track. If the
system has successfully detected the drive automatically, there is no
need to adjust this field. In order to make changes to this field, the
Type field must be set to User.
Multi-Sector Transfers
This option automatically sets the number of sectors per block to the
highest number supported by the drive.
This field can also be configured manually. Note that when this field
is automatically configured, the set value may not always be the
fastest value for the drive. Set the Type field to
Auto to provide the
optimum transfer mode. Configurations are:
•
Disabled (default value)