Targa CR 3 A1, Инструкция по эксплуатации и правила безопасности

Страница: 75 / 386

CR 3 A1
English - 73
6.2 Car mount
The car mount allows the Dashboard Camera to be mounted on the windscreen of your vehicle.
DANGER! Install the car mount so it does not obstruct the driver’s view.
When driving in the United Kingdom: The Dashboard Camera may not be installed within the
field of sight of the driver and also not in the area covered by the windscreen wipers. You
must also observe the Road Traffic Act 1988 regulations.
1. Connect the Dashboard Camera to the car mount. To do this,
slide the fixing rail (15) onto the counterpart (19) of the car
mount.
2. Then press the suction pad (22) of the car mount against the
windscreen and secure by pressing down the lever (21).
As the fixing rail (15) is located at the top of the
Dashboard Camera, you should install the car mount such
that the Dashboard Camera "hangs" off it (see adjacent
image). Otherwise the picture would appear upside
down.
DANGER!
Do not install the car mount (with or without the Dashboard Camera) within the
operating area of the vehicle’s airbag and install the car mount so that the driver’s view is not
obstructed.
3. Loosen the knurled screw (20) to line up the Dashboard Camera in the desired position with the help
of the ball joint. Re-tighten the knurled screw (20).