Targa CR 3 A1, Инструкция по эксплуатации и правила безопасности

Страница: 67 / 386

CR 3 A1
English - 65
Explanation of symbols
In this user manual, warnings are used as follows.
DANGER!
This icon and the word “DANGER” alert you to a potentially dangerous situation.
Ignoring it can lead to severe injury or even death.
WARNING!
This symbol and the word “WARNING” denote important information required
for the safe operation of the product and for the safety of its users.
Caution! This symbol and the word “Caution” denote important information that can lead to
legal actions when ignored.
This symbol denotes further information on the topic.
WARNING! Always make sure that

the device is not exposed to direct heat sources (e.g. radiators);

no direct sunlight or bright artificial light reaches the device;

the Dashboard Camera may be used within the allowed operating temperature range from 0°C to
40 °C only;

contact with water sprays or drops and corrosive liquids is avoided and the device is never operated
near water; in particular the device may never be immersed in liquids (do not place any objects
containing liquids, such as vases or drinks, on or near the device);

the device is never placed near magnetic fields (e.g. speakers);

no naked flames (e.g. burning candles) are placed on or near the device;

no foreign bodies can penetrate into the device;

the device is not exposed to any extreme temperature fluctuations as this can cause moisture through
condensation and cause short-circuits. If the device has been exposed to strong temperature variations,
wait for it to reach the ambient temperature before switching it on (about 2 hours).

the device should not be subjected to excessive shocks and vibrations;

the device and its accessories are not damaged in order to avoid any further risks. Therefore you must
inspect the device and its accessories regularly for any damage. If you find any component damaged,
it must not be used. Never open the Dashboard Camera or the car charger housing and have all
repairs performed by qualified technical staff only;