Targa 275087, Руководство пользователя и сервисная информация

Страница: 9 / 58

LIVARNO LUX LSL 10 A3
English - 7
Copyright
All information contained in these instructions is subject to copyright and is
provided for information purposes only. It is only permitted to copy or
duplicate data and information with the express and written consent of the
author. This also includes commercial use of the content and data. The text
and illustrations are based on the state of the art at the time of printing.
Subject to change.
Prior to use
Remove the LED spotlight and the installation materials from the packaging.
Check the LED spotlight for signs of damage. If damaged, the LED spotlight
must not be used.
Assembly
The installation must be performed only by
an authorised electrician!
The circuit must be switched off during the
installation!
Use suitable tools for the installation.
When drilling the holes, make sure that no
cables or pipes in the wall are damaged.
Use a H05RN-F power cable [5], for
example.

Remove the mounting bracket [3] from the LED spotlight [1].

Use the mounting bracket [3] as a template to mark the two outer holes.

Then drill two holes and attach the mounting bracket [3] using the
supplied plugs and screws.

Open the junction box [2] by loosening the four screws and removing the
cover.

Loosen the cable gland [4] and remove the rubber seal.

Put the nut of the cable gland [4] and then the rubber seal with the flat
side first on the power cable [5].

Run the power cable [5] through the cable gland [4].

Connect the power cable [5] using the screw terminal [6]. Make sure that
the individual wires of the power cable [5] are connected correctly.