Tarfire SF-2200H, Руководство по эксплуатации

Страница: 3 / 31

SF-2200H Flame / Plasma CNC Cutting System Operating Manual 1
*
Please read carefully this manual before use the system.
Attention
:
1) After open the packing case, please check the goods and whether accord with
the list.
2) This manual is only for Portable Flame/Plasma cutting machine system
produced by Beijing Start Microstep.
3) Operating environment temperature is 0-40
℃
. Relative humidity should be
controlled in 0-85%. Under high-temperature, high-humidity, caustic gas, must
adopt special defend measure.
4) In order to ensure control system working normally and improve system
reliability and ensure the operator
’s safety; cutting machine tools and control
system all should be well earthed.
5) Control system should be insulated from outside to avoid dirt and powder
entering and result in control system working abnormally, system parts
damaged, etc.
6) The system operator should be well-trained and familiar with the system
before operating special operator.