Tarasola Screener 110 ZIP, Инструкция по использованию и руководство по эксплуатации

Страница: 4 / 16

4
The calculations concerning wind load resistance were performed according to the
standard PN - EN 1932: 2013 - 09 - EXTERNAL BLINDS AND SHUTTERS - RESISTANCE TO WIND LOADS
METHOD OF TESTING.
Familiarizing oneself with the manual shall ensure the proper functioning of the product.
Compliance with the guidelines therein shall ensure durability of the roller blind.
3 TECHNICAL SPECIFICATION
3.1 Structure
Each roller blind, regardless of the system solution employed, is made of extruded aluminum
profiles, coated with a layer of thermally hardened powder
varnish.
The roller blind consists of the following elements:
1. Aluminum guides – enable the fabric to be guided properly. The fabric is connected
to a zipper mechanism and a PVC guiding insert,
2. Cassette – two profiles put together, for recess or f aç ade installation with inspection
access from the front side of the roller blind,
3. Load beam – aluminum profile that ensures the fabric is adequately stretched when
fully unfolded,
4. Winding tube – aluminum profile, equipped with a motor (in case of an electric drive),
onto which a portion of the fabric is wound,
5. Cover – a reflective fabric of the screen type,
6. Cord, nylon cord – components used in the fabric guiding process, in case
of a Screener roller blind.
Note: there may be slight color differences between various suppliers of paint powders.