Tarasola Screener 110 ZIP, Инструкция по использованию и руководство по эксплуатации

Страница: 11 / 16

11
The roller blind shall be used for a maximum of 50 opening and closing cycles
per day.
Repeated unfolding and folding of the roller blind may overheat the electric drive,
thus activating the thermal switch which shall disconnect the power supply. The
motor shall remain off until the temperature is adjusted.
It is forbidden to use the blind in conditions and for purposes different to those
provided for by the manufacturer, which shall be to act as sun, rain, and wind
protection.
It is forbidden to place any items, install additional fixings, hooks, hangers on the
component aluminum profiles that make up the structure - this increases the
risk of damage and shall result in product warranty being voided.
It is forbidden to place any items or objects on the material of the blind.
When unfolding the roller blind, please make sure that there are no people or
objects in its path of movement.
Before folding the roller blind, please remove any dirt that may cause
mechanical damage to the material or the frame itself.
Be careful when unfolding and folding the roller blind. Due to the risk of damaging
one’s hands, it is forbidden to touch the roller blind when it is in work mode.
It is forbidden to move the fabric cover of the roller blind upwards using hands
or any tools. This may cause the roller blind to malfunction or cause direct
damage to the roller blind.
The roller blind is not a self-cleaning structure. Cleaning shall be performed only
after turning off the electric power supply of the roller blind. Cleaning agents are
recommended for this
– they are listed, for each type of fabric, in section (3.3
Fabric components in the roller blind) of the Manual.
The use of highly corrosive cleaning agents may damage the fabric. The
manufacturer shall not be liable for such damage. The impregnating agents
used within the fabric of the roller blinds require cleaning with a cloth and water
only.