Tarasola Cubic, Руководство по эксплуатации и обслуживанию

Страница: 4 / 14

4
3 TECHNICAL SPECIFICATION
3.1 Structure
The canopy structure consists of an aluminum substructure. The structural
elements are thick-walled extruded profiles, coated with a layer of thermally
hardened powder varnish.
Supporting structure consists of the following elements:
1. Aluminum guides - the number and spacing of the guides depends on
the width of the unit.
2. Clamping beams – aluminum profile with an integrated gutter, acting
as a front and rear beam that connects the structure.
3. Support pillars - aluminum leg profile together with an integrated
water drainage system. The number of supporting legs depends on
the width of the module. The supporting pillars are equipped with
brackets intended for screwing to the base.
4. Side gutters (middle gutters) – aluminum profile that drains water
and stiffens the structure.
5. System roof - made of steel or aluminum sheet. The system roof
overhang depends on the canopy extension.
6. Aluminum anti-wind beams - guide, stretch, and strengthen the
material of the beam with the fabric.
7. Starting profile - aluminum wall mounting profile, available in the wall
unit.
Note: there may be slight color differences between various
suppliers of paint powders.