09
Important recommendations
Presentation
2- The Smart Charger 120A has an “automatic bivolt” system - it automatically recognizes the
voltage of the electrical network and adjusts itself to it. For the power supply to have the
expected performance, the outlet voltage must be above 90V (127V network) or above 190V
(220V network).
5- If the power supply is not going to be used for a long period, we recommend unplugging it
from the power outlet.
1- Never use extensions with a gauge smaller than the recommended. Make sure that the
socket and the electrical network can handle the necessary current to power the power supply
(see page 10 / 11).
3- Install the power supply in a firm and well-ventilated place. Never install it on the sides of
speakers boxes, due to vibration.
6- Do not install the power supply in a place with direct exposure to sunlight.
4- The power supply has no user-serviceable internal parts. Do not open it, risk of electric shock.
The SMART CHARGER Power Supply / Charger features high technology and smart and efficient
features for RECHARGING batteries and/or POWERING a car sound system. Highlighting:
- When used only as a power supply (without batteries) the power supply output voltage is
automatically adjusted to 12.6V..
- During battery recharge, if the audio system is turned on, the power supply automatically
identifies the need for charging and adjusts its output to 14.4V. If no more output variations are
identified, the source returns to the smart charging system or float.
- Automatic detection of the load characteristics connected to its output. In case it has
batteries, the device analyzes their characteristics and conditions and recharges them seeking
the best performance. If the battery charge level is critical, the power supply automatically
adjusts the output current, smartly charging the batteries.
- Output short circuit protection.
WARNING: NEVER REVERSE POLARITY.
- When charging the batteries, the power supply periodically oscillates between voltages 14.4V
/ 13.8V / 12.6V; doing the battery float and equalize cycles. This process decreases the internal
heat of the batteries, improving charge retention efficiency.
Introdution
Congratulations on your purchase of a Taramps product. Designed in a modern laboratory,
with the highest technology and highly qualified professionals.This manual explains all
features, operations, and guidelines to answer questions that may arise during your
installation. Please take the time to read it carefully to ensure proper installation and use of all
the benefits this product can offer.If there is any question after reading this manual, contact
our technical support at the phone number +55(18)-3266-4050 or through our website
www.taramps.com.br.
www.taramps.com.br
.
Taramps reserves the right to change the content of this manual without prior notice or obligation to apply the
modifications to previously produced units.
Safety warnings
As you read this manual, pay attention to the safety warning symbols.
The "Caution" symbol is intended to alert the user to important instructions.
Failure to follow instructions could result in risk to the user or damage to the
product.
CAUTION
ENGLISH
Содержание SMART CHARGER AUTOCONTROL 120
Страница 1: ......
