Taramps MD 800.1, Инструкция по эксплуатации

Страница: 12 / 14

Installation
Recommended wire gauge & fuse
CAUTION: All connections to power supply, input and output connectors must be
carried out only with amplifier off.
Check polarity and never reverse power supply cables due to the risk of damage to the
amplifier.
Output cables with gauge_______________________________ ______________
_
11 A
Caution: Using wire gauges below the recommendation will result in power loss and
overheating of wiring.
Positive / negative power supply cable ___________________ _______________7 AWG
Remote cable ___________________ _________________________________
_
18 AWG
It is compulsory to install a protection fuses or circuit breakers as close as possible from
batteries.
Calculated considering a maximum length of 4m. Distance greater than this, you will
need to increase the cable gauges.
Protection fuse or circuit breaker _______________________________________
__
50A
* Remote connection is not required. A.R.T. See page 03.
Exemplo de Ligação com RCA
10mm² (7 AWG)
10mm² (7 AWG)
*Illustrative images
12V
GND
Remote Cable 18 AWG
4mm² (11 A
WG)
4mm² (11 A
WG)
RCA cable
Taramps
Head Unit
blue (input R+)
blue (input L+)
gray (input L-)
gray (input R-)
Amplified Outputs
of the Head Unit
10mm² (7 AWG)
10mm² (7 AWG)
*Illustrative images
12V
GND
4mm² (11 A
WG)
4mm² (11 A
WG)
Head Unit
Exemplo de Ligação com entrada a o*
Connection example with RCA
Wire input connection*
ENGLISH
11