Taramps HV 40.000 CHIPEO, Инструкция по эксплуатации

Страница: 10 / 20

Technical features
Short-Circuit to Output, Short on output compared to GND, Low
impedance at output, High/Low supply voltage and Thermal
protection**
227VDC @ 0.5 Ohm - 18 Batteries
>95dB
1
40.000W RMS
330mV ( Level 100%) @ 0.5 Ohm
0.3%
10Hz ~ 15KHz (0.5dB)
92% @ 0.5 Ohm (at Maximum Power)
27K Ohms
110mA
91.5A
228 x 64 x 561mm / 8.98" x 2.52" x 22.07"
5.70Kg / 12.54lb
183A
275VDC
140VDC
Number of channels:
Efficiency:
Protection system:
Maximum supply voltage:
Weight:
Input sensitivity:
Input impedance:
Maximum output power @ 227 VDC - 0.5 Ohm*:
Signal to-noise ratio:
Minimum supply voltage:
Frequency response:
Working voltage:
Total harmonic distortion (THD):
Maximum musical consumption @0.5 Ohm:
Dimensions (W x H x D):
Idle consumption:
Maximum sinusoidal consumption @0.5 Ohm (100Hz):
After a thermal shutdown we recommend keep the amplifier on, so the cooling time is shorter, due to the ventilation of the coolers.
** NOTE.: The HV 40.000 has a controlled thermal protection system. When the amplifier reaches
the temperature equivalent to 80°C (194°F) thermal protection acts, the audio is stopped and the yellow LED will flash. Only when the
amplifier back to a temperature less than 70°C (158°F) it resumes the normal operation.
14 15 16 17
21.600 26.600 31.500 36.500
12.6Volts BATTERIES
Maximum Output Power*
09