Taramps DS 800X3, Инструкция по эксплуатации

Страница: 13 / 14

12
Technical features
Minimum Output Impedance:
Output Power / @12.6VDC:
Input Sensitivity (Level 100%):
Signal- to-noise Ratio:
Number of Channels:
Musical Consumption / @12.6VDC:
Dimensions (W x H x L):
LPF (Low Pass Filter):
Crossover (CH1 / CH2)
Crossover (CH3)
Idle Consumption:
Protection System:
Input Impedance:
HPF (High Pass Filter):
Rated Power Consumption:
Weigth:
Frequency Response:
Minimum Supply Voltage:
Maximum Supply Voltage:
***Frequency response measured at 2 times the minimum impedance.
For further informations or questions, visit our website or contact TARAMPS support.
*Rated power with 1KHz sinusoidal signal and THD <= 1% in CH1 and CH2, at the minimum impedance resistive load, measured with Audio
Precision APx525 audio analyzer or equivalent and the product at lower than 50°C case temperature and 12.6V supply voltage.
**Rated power with 60Hz sinusoidal signal and THD <= 1% in CH3, with resistive load, measured with Audio Precision APx525 audio analyzer or
equivalent and the product at lower than 50°C case temperature and 12.6V supply voltage. The CH3 minimum impedance must be the double
of CH1 / CH2 minimum impedance.
The values as above are typical and may vary, due to electronic components tolerance or manufacturing process.
102A
51A
1.0A 1.4A
86A
43A
9VDC
>88dB
CH3
10Hz ~ 700Hz (LPF = 700Hz)***
03
10K Ohms (RCA) e 1K Ohms (Wire)
Selectable
Output overload
10Hz ~ 25KHz (LPF = OFF)***
CH1/CH2
10Hz ~ 100Hz (LPF = 100Hz)***
100Hz (-12dB/8ª) Fixed
100Hz ~ 25KHz (-3dB)***
100Hz, 700Hz, OFF (-12dB/8ª)
250mV
16VDC
173 x 52 x 227mm (6.81" x 2.05" x 8.94")
1.43Kg (3.15lb)
1 OHM
CH1/ CH2 (2 x 200W RMS) 1 OHM*
CH3 (1 x 400W RMS) 2 OHMS**
2 OHMS
CH1/ CH2 (2 x 200W RMS) 2 OHMS*
CH3 (1 x 400W RMS) 4 OHMS**