3
……................
by
Safety and Operation Instructions for the
DeBurr
-
Z
TAPMATIC
⚫
802 Clearwater Loop, Post Falls ID 83854
Tel. 800 854
-
6019
⚫
Tel. 001 208 773
-
2951
⚫
Fax 001 208 773
-
3021
⚫
www.tapmatic.com
All
-
in One Overview
Advantages, Function and Characteristics
The
DeBurr
-
Z
deburring tool is an axially (Z axis) floating
tool holder, for use on CNC machines, designed for deburring
or chamfering the sharp edges of a work piece. The floating
holder allows the burr cutting tool to follow the edges of the
part even when these are not clearly defined or vary in posi-
tion like in the case of castings, cross holes or intersecting
surfaces.
The
DeBurr
-
Z
compensates in both the compression and the
extension direction allowing you to deburr both the top edges
and underside edges of the work piece.
There are 10mm of both compression float and extension float
and the force exerted against the work piece edge can be ad-
justed for harder work piece materials or to increase the size
of the edge break.
The force adjustment works equally and simultaneously in
both the compression and extension direction and making an
adjustment does not effect the tool length.
Neighboring tools and collision areas in the machine
’
s tool
magazine will normally not pose a problem thanks to the com-
pact design.
Maximum recommended speed is 10,000 RPM.
The feed rate can be programmed based on the material, and
the desired edge break size and finish.
Using external flood coolant / lubrication, results in the longest
tool life and best finish.
Burr cutting tools with angular
and spherical profiles can be
used, like the examples
shown here.
