Product Description
MECip
SECURE
- 11 -
1.6
Important Notes
It is recommended to participate the standardized courses of a KNX-certified training center
before installing, programming, and commissioning a KNX system. Here, the participant gains
the necessary knowledge and skills, also required for troubleshooting, by practical exercises.
Please read this chapter carefully before first use and installation:
1.6.1
Installation and Commissioning
•
In the case of damage (at storage, transport) no repairs may be carried out by
unauthorized persons
•
After connection to the KNX bus system, the device works with its default settings
•
Warning: Do not connect to 230 V. The device is supplied by the KNX bus and does not
require any additional external power supply
•
The device may only be installed and put into operation by a qualified electrician or
authorized person
•
For planning and construction of electric installations the appropriate specifications,
guidelines and regulations in force of the respective country have to be complied
•
For configuring, use the ETS (or ETS Inside)
1.6.2
Mounting and Safety
•
For mounting use an appropriate equipment according to IEC60715
•
Installation on a 35 mm DIN rail (TH35)
•
Connect the KNX bus line as for common KNX bus connections with a KNX bus cable, to be
stripped and plugged into a KNX TP connector
•
Do not damage electrical insulations during connecting
•
Installation only in dry locations
1.6.3
Maintenance
•
Accessibility of the device for operation and visual inspection must be provided
•
The housing must not be opened
•
Protect the device from moisture, dirt and damage
•
The device needs no maintenance
•
If necessary, the device can be cleaned with a dry cloth
