TapFlo Steinle Filter Press Pump Series, Оригинальная инструкция

Страница: 24 / 65

3. MAINTENANCE
Steinle Filter Press Pump Series
24
Fig. 3.6.3c
Remove the control unit [35].
Fig. 3.6.3d
Remove the Quick exhaust valves [32], Sensors [30]
and Bronze mufflers [63]. However do not remove
sensor if it's not required.
Fig. 3.6.4
Pumps in sizes 25 - 40 are taken out of the base
frame and dismantled on a clean table.
Fig. 3.6.5a
Unscrew and remove eight hex screws [38]
connecting the Discharge Manifold [3] to the
housings [1].
Fig. 3.6.5b
Remove discharge manifold [3] from the housings
[1].
Fig. 3.6.5c
Remove Ball Retainers [11], valve balls [20], Valve
Seats [19], O-rings Valve seat [16] and O-rings Flange
[24] from the housings [1].