4.
SPARE PARTS
IOM manual Tapflo Hose pumps
34
4.7.
Pump code
The model number on the pump and on the front page of this instruction manual tells the
pump size and materials of the pump.
I. Tapflo hose pump
IV. Material of pump housing
II. Pump series
V. Material of hose
III. Pump size
VI. Special executions
VII. Motor power
VIII. Output rpm
IX. Motor options
PT
L
25
A R- 1S3F -05 /38
D
I.
PT = Tapflo hose pump
II.
Pump series:
blank
= High pressure pumps
L = Low pressure pumps
III.
Pump size = Hose inner diameter
IV.
Material of pump housing:
A = Aluminium
(standard)
V.
Material of hose:
E = EPDM
N = NBR (nitrile rubber)
R = NR
(standard)
W = EPDM FDA
S = NR FDA
F = NBR FDA
VI.
Special executions:
1
= Optional insert material
S = AISI 316L
(standard)
T = PTFE
P = PE AST
L = PP
2 = Inlet/outlet direction (looking from pump head side)
L = Left
(standard)
R = Right
U = Up
D = Down
3 = Optional connection type
A = ANSI/ASME B16.5 Class 150 Flange
B = BSP male thread
C = SMS 3017 clamp
F = EN 1092-1 flange
H = Hose tail
(standard)
T = DIN 32676 clamp
5 = Other special executions
L = Hose leak detection system
T = 3-lobe rotor (standard on PT5)
6 = Optional flange bracket material
blank =
Galvanized steel
S = AISI 304L stainless steel
VII.
Motor power
01 = 0.18 kW
02 = 0.25 kW
03 = 0.37 kW
05 = 0.55 kW
07 = 0.75 kW
11 = 1.1 kW
15 = 1.5 kW
22 = 2.2 kW
VIII.
Output rpm
IX.
Motor options
C = External cooling fan
D = Built on frequency inverter
A = Angle reducer
Содержание PTL P
Страница 45: ......
