20
Instruction manual CTM mag drive pumps
IOM manual Tapflo PE & PTFE series pumps
21
a new commencement of, the period of warranty. Repair or replacement under the terms of this
warranty may be fulfilled with functionally equivalent reconditioned units. Tapflo qualified personnel
shall be solely entitled to carry out repair or replacement of faulty parts after careful examination
of the pump. Replaced faulty parts or components will become the property of Tapflo
7 The products are built in accordance with standard CE normative and are tested (where applicable)
by Tapflo. Approval and tests by other control authority are for the customers account. The products
shall not be considered defective in materials, design or workmanship if they need to be adapted,
changed or adjusted to conform to national or local technical or safety standards in force in any
country other than that for which the unit was originally designed and manufactured. This warranty
shall not reimburse such adaptations, changes or adjustments, or attempt to do so, whether properly
performed or not, nor any damage resulting from them, nor any adaptation, change or adjustments
to upgrade the products from their normal purpose as described in the products operative manual
without the prior written consent of Tapflo
8 Installation, including electric and other connections to utility mains according to Tapflo drawings,
is for the cost and responsibility of the customer, unless otherwise agreed in writing.
9 Tapflo will not be liable on any claim, whether in contact, tort, or otherwise, for any indirect, special,
incidental, or consequential damages, caused to the customer or to third parties, including loss of
profits, arising by any possible infringement of par. 3 above or by the customer or third parties being
in the impossibility of using the products.
Steady the above,Tapflo liability to the customer or third parties from any claim, whether in contract,
tort, or otherwise, shall be limited to the total amount paid by the customer for the product that caused
the damages.
6. WARRANTY & REPAIR
6. WARRANTY & REPAIR
Company:
Telephone:
Fax:
Address:
Country:
Contact name:
E-mail:
Delivery date:
Pump was installed (date):
Pump type:
Serial No (see name plate):
Description of the fault:
The installation
Liquid:
Temperature (°C):
Viscosity (cPs):
Spec. grav. (kg/m
3
):
pH-value:
Contents of particles: %, of max size (mm):
Flow (l/min):
Duty (h/day):
No of starts per day:
Discharge head (mwc):
Suction head/lift (m):
Other:
Place for sketch of the installation
6.3
Warranty form