9
(2) Implementation of the above "1 on 1 match" process;
(3) Successful pairing shows that the first receiver has access to the network, called as
"1 to 1 model";
(4) Match the second receiver:
(a) Pull out the second receiver's USB cable from the computer and make sure that
USB cable and the receiver is connected, and that the receiver
’
s antenna connected
properly;
(b)Use "1 on 2 match " bar (see common features for bar code setting) in the printed
scanner scan manual;
(c)After scanning, connect the receiver
’
s USB cable to the computer within 5
seconds;
(d)If the scanner buzzer "Didi tick" three times, said the pairing is successful, if
given a "dee dee dee dee dee dee" , said pairing failed;
(e)If the pairing fails, repeat steps (a),(b),(c).
(5) If the pairing is successful, it shows that the matching of 1 on 2 network is
successful and can be used.
10.
Common features of bar code setting.
1 on 1 match: Scanned this
order and if the original match
failed then execute new match.
H Y C O C M D -
M G
1 on 2 match
：
In 1 to 2
mode,scan this order when
configure the second receiver.
H Y C O C M D -
M G A
20 seconds automatically shut
down if no action: Set the
scanner
shut
down
H Y C O C M D -
S 2 0
