TAO F125 Скачать руководство пользователя страница 32

Страница: 32 / 76

THROTTLE CABLE

Throttle cable inspection
Inspect throttle cable for excessive wear, kinking or fraying. Ensure cable moves freely.

The throttle cable must be replaced if any signs of wear, fraying or other damages found.

Lubricate cable using silicone cable lubricant to reduce premature wear and to ensure proper movement of

the cable.

THROTTLE CABLE ADJUSTMENT

Check throttle lever free-play, adjust if necessary.

Please check with Tao Motor dealer if throttle cable adjustment can not be adjusted properly.

Normal throttle free-play is 5mm to 10mm 0.197 In to 0.394

To adjust throttle cable,

Pull rubber dust covers back to inspect and adjust throttle cable.

Loosen lock nut.

Turn throttle cable adjuster to make proper adjustments of throttle cable.

Tighten locking nut and reinstall rubber dust cable covers.

Measure throttle free play at the tip of the lever.

Check proper throttle cable adjustment by turning handlebars completely

to the left and right. If RPM increases when turning, then re-adjust throttle

cable to increase lever free-play. Check throttle cable routing to make

sure there is no cable binding when turning handlebars.

The handlebar should move left to right

without change in engine RPM.

NOTE

TIP

NOTE

Throttle Cable Locknut

Throttle Cable Adjuster

Содержание F125













































































Результаты поиска

Содержание F125

Отзывы:

TAO F125, Руководство пользователя, Страница: 32 / 76

Результаты поиска

Содержание F125

Отзывы: