TAO F125 Скачать руководство пользователя страница 22

Страница: 22 / 76

BATTERY

Battery Removal

Insert battery into battery tray with battery terminal nuts and bolts already

installed on the battery.

Remove battery terminal bolts.

Connect positive cable and re-screw battery terminal bolt.

Connect negative cable and re-screw battery terminal bolt.

Reinstall seat.

NOTICE

Positive (+) cable is red in color.

Negative(-) Cable is in black in color.

Battery electrolyte is poisonous and dangerous, acid contains sulfuric acid, which can cause severe burns. Avoid contact with skin, eyes

or clothing. Always shield your eyes when working near batteries.

EXTERNAL: Flush with water.

INTERNAL: Call a physician Immediately and get medical attention.

EYES: Rush with water for 15 minutes and get prompt medical attention.

Batteries produce explosive gases. Keep sparks, flame, cigarettes or other sources of ignition away. Ventilate when charging or using in

an enclosed space.

KEEP OUT OF REACH OF CHILDREN.

Battery ( 9 Amp )

Make sure the ignition switch is set to the "OFF" position.

Remove seat

Disconnect the negative cable from the battery by unscrewing battery terminal bolt.

Disconnect the positive cable from the battery by unscrewing battery terminal bolt.

Remove battery from battery tray .

Battery Installation

Содержание F125













































































Результаты поиска

Содержание F125

Отзывы:

TAO F125, Руководство пользователя, Страница: 22 / 76

Результаты поиска

Содержание F125

Отзывы: